Selling Fluke FTK1000 – We Buy New Used FTK1000 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke FTK1000 Multimode Optical Fiber Test Kit

Fluke Networks FTK1000

Features:

  • Dual-wavelength testing
  • Tests multimode and singlemode fiber
  • Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter
  • Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources
  • Offers quick remote identification of cabling runs with FindFiber Remote IDs
  • Conduct pre-testing and qualify cabling runs
  • Auto-senses source wavelength
  • Saves 1000 test results
  • Single port testing for simple network connection
  • Ruggedly built for demanding field use
  • LinkWare Cable Test Management Software documents, reports, and manages all test data

The new SimpliFiber Pro Optical Power Meter and Fiber Test Kits are the best “go-to” kits for anyone involved in first-line optical fiber cabling installation and verification. Whether you are a fiber technician or contractor, our expertly configured kits contain all the tools necessary to quickly measure loss and power levels, locate faults and polarity issues, and inspect and clean connector end-faces. Industry-leading features such as single-port dual-wavelength testing and auto-wavelength detection, combined with time-saving capabilities such as CheckActive™, FindFiber™, and Min/Max make SimpliFiber Pro the best fiber test kits on the market.

SimpliFiber Pro is an improved fiber test set that simplifies and shortens the front-line testing process by:

  • reducing the multiple steps and using a simultaneous dual-wavelength testing feature to measure the range of power levels in just half the time
  • allowing for a non-touch solution to check for a live fiber without having to plug into ports
  • enabling a network technician to do time-consuming procedures that normally require a team

SimpliFiber Pro Optical Power Meter and Fiber Test Kits provide you with all the tools you need to help you verify proper installation and maintain fiber-optic cabling systems. Available in kits or a la carte, these tools are simple and effective and provide you with the capability to measure loss and power levels, locate faults and polarity issues, and inspect connector end-faces.

Buying, Selling, Trading Fluke FTK1000

A system approach SimpliFiber Pro is a product suite that allows you to match products and functionality to your needs. SimpliFiber Pro is made up of four unique fiber platforms: the power meter, the multimode source, the singlemode source, and the FindFiberTM Remote ID source. Each platform has uniquely competitive features, bundled in convenient kits, to meet the needs of today’s technicians. The optical power meter is included in all kits and is calibrated for accuracy at six different wavelengths (850, 1300, 1310, 1490, 1550, 1625). The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It also has an intuitive four-button panel, a large LCD display screen, and a serial port. The meter’s single connector permits simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

If you’re selling your Fluke FTK1000 please fill out form on the right hand side of page.

Selling Fluke SM MM Fiber – We Buy New Used SM MM Fiber(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke SM MM Fiber Networks SimpliFiber Test Set

SimpliFiber Optical Loss Test Kit

Today’s high bandwidth premise networks heavily rely on fiber optic infrastructure. Proper installation and maintenance of fiber cabling is imperative for minimizing costly network downtime. SimpliFiber Optical Loss Test Kits from Fluke Networks provide you with all the tools you need to help you verify proper installation and maintain fiber optic cabling systems.

Features:

  • Verify loss and power levels for both singlemode and multimode fiber links
  • Ensure smooth, clean fiber connector endfaces
  • Locate cable faults, connector problems and polarity issues
  • Count on tools that are field-tough and user-friendly
  • Convenient carrying case provides protection and easy transport
  • Ensure you have the tools you need when you need them

Buying, Selling, Trading Fluke SM MM Fiber
Verify optical loss and power levels

SimpliFiber Power Meter is calibrated for accuracy at 850 nm, 1300 nm, 1310 nm and 1550 nm. The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It has an intuitive four-button panel, a large LCD display screen and a serial port to upload test results to a PC running LinkWare. SimpliFiber Sources include a dual wavelength SimpliFiber 850/1300 nm Source and separate 1310nm & 1550nm SimpliFiber Sources.

If you’re selling your Fluke SM MM Fiber please fill out form on the right hand side of page.

Selling Fluke SM MM Fiber– We Buy New Used SM MM Fiber(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke SM MM Fiber Microtest SimpliFiber Test Set

Today’s high bandwidth premise networks heavily rely on fiber optic infrastructure. Proper installation and maintenance of fiber cabling is imperative for minimizing costly network downtime. SimpliFiber Optical Loss Test Kits from Fluke Networks provide you with all the tools you need to help you verify proper installation and maintain fiber optic cabling systems.

Features:

Verify loss and power levels for both singlemode and multimode fiber links
Ensure smooth, clean fiber connector endfaces
Locate cable faults, connector problems and polarity issues
Count on tools that are field-tough and user-friendly
Convenient carrying case provides protection and easy transport
Ensure you have the tools you need when you need them
Verify optical loss and power levels
SimpliFiber Power Meter is calibrated for accuracy at 850 nm, 1300 nm, 1310 nm and 1550 nm. The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It has an intuitive four-button panel, a large LCD display screen and a serial port to upload test results to a PC running LinkWare. SimpliFiber Sources include a dual wavelength SimpliFiber 850/1300 nm Source and separate 1310 nm and 1550 nm SimpliFiber Source. The 1310 Source features a 1310 nm laser.

Reporting made simple
Manage test results, print professional reports or export data into spreadsheet formats. Both SimpliFiber and CableIQ store test results in memory. SimpiFiber stores up to 100 test results which can be uploaded to your PC using LinkWare Software that comes free with your SimpliFiber.

Buying, Selling, Trading Fluke SM MM Fiber

LinkWare gives you the ability to manage test results data from multiple testers with one PC software application. It makes project setup simpler by helping you quickly organize, edit, view, print, save or archive test results by job site, customer, campus or building. You can merge test results into an existing LinkWare database and then sort, search and organize the results by data fields or parameters. And you can count on your data integrity to be secure. Any data uploaded to your computer with LinkWare ensures that the results you store came from the testers’ memory.
.
If you’re selling your Fluke SM MM Fiber please fill out form on the right hand side of page.

Selling Fluke SM 1310nm – We Buy New Used SM 1310nm (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke SM 1310nm Microtest SimpliFiber Laser Source

The SimpliFiber Source is an active and intelligent light source that
works with SimpliFiber Meter (Not Included) to verify optical cable transmission
quality. The SimpliFiber 1310 Source is a laser light source.

Buying, Selling, Trading Fluke SM 1310nm

If you’re selling your Fluke SM 1310nm please fill out form on the right hand side of page.

Selling Fluke FM150 – We Buy New Used FM150(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke FM150 SM MM Fiber Optical Power Meter FM-150

FM150 Fiber Meter

 

  • Measures optical power loss of multimode or singlemode fibers.
  • Measures output power from optical sources such as network interface cards or optical test equipment.
  • Displays output power measurements in dBm or µW.
  • Operates for up to 30 hours on a single 9 V alkaline battery. Automatic power-down feature helps conserve battery power.
  • Displays remaining battery life.
  • Designed to use the optional ToolPakä Meter Hanging Kit from Fluke.
  • Saves up to 500 measurements for each wavelength.

Buying, Selling, Trading Fluke FM150

If you’re selling your Fluke FM150 please fill out form on the right hand side of page.

Selling Fluke FiberLight MM – We Buy New Used FiberLight MM(‘s) Top Dollar Paid!

If you’re looking to Sell FiberLight MM Microtest Fiber Light Source

The Fiberlight Optical Source has an 850 and 1300 nm output at -15 dbm.

FiberLight can be used in conjuction with FiberEye to provide a consistent, calibrated light source that increases the ease of effectiveness of fiber optic testing, according to the company. The light source incorporates two highly efficient LEDs, each with its own external connector. One transmits at the wavelength used in Ethernet and Token Ring networks, the other, at the wavelength used in FDDI networks. With two built-in light sources, it can be used to test fiber cable plants that support all three network types more quickly than conventional light sources.

Buying, Selling, Trading FiberLight MM2

If you’re selling your FiberLight MM please fill out form on the right hand side of page.

Selling Fluke FiberEye MM – We Buy New Used FiberEye MM(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke FiberEye MM Microtest Fiber Power Meter

FiberEye is designed to help assess the performance of fiber optical transmission paths and equipment. It measures the power of light injected into or emerging from the fiber network. The accurate and repeatable measurement of optical power and signal loss in fiber is essential for installing, maintaining or troubleshooting fiber optics. By measuring optical power, the meter can verify the proper installation and operation of a variety of fiber optic components, such as fiber hub modules, repeaters and adapter cards. By measuring signal loss, it can help identify faulty patch cables, failing splices or bad couplers and connectors.

Buying, Selling, Trading Fluke FiberEye MM

If you’re selling your Fluke FiberEye MM please fill out form on the right hand side of page.

Selling Fluke SM MM Fiber – We Buy New Used SM MM Fiber(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke SM MM Fiber Microtest SimpliFiber Test Set

Today’s high bandwidth premise networks heavily rely on fiber optic infrastructure. Proper installation and maintenance of fiber cabling is imperative for minimizing costly network downtime. SimpliFiber Optical Loss Test Kits from Fluke Networks provide you with all the tools you need to help you verify proper installation and maintain fiber optic cabling systems.

Buying, Selling, Trading Fluke SM MM Fiber

Features:

Verify loss and power levels for both singlemode and multimode fiber links
Ensure smooth, clean fiber connector endfaces
Locate cable faults, connector problems and polarity issues
Count on tools that are field-tough and user-friendly
Convenient carrying case provides protection and easy transport
Ensure you have the tools you need when you need them
Verify optical loss and power levels
SimpliFiber Power Meter is calibrated for accuracy at 850 nm, 1300 nm, 1310 nm and 1550 nm. The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It has an intuitive four-button panel, a large LCD display screen and a serial port to upload test results to a PC running LinkWare. SimpliFiber Sources include a dual wavelength SimpliFiber 850/1300 nm Source and separate 1310 nm and 1550 nm SimpliFiber Source. The 1310 Source features a 1310 nm laser.

Reporting made simple
Manage test results, print professional reports or export data into spreadsheet formats. Both SimpliFiber and CableIQ store test results in memory. SimpiFiber stores up to 100 test results which can be uploaded to your PC using LinkWare Software that comes free with your SimpliFiber.

LinkWare gives you the ability to manage test results data from multiple testers with one PC software application. It makes project setup simpler by helping you quickly organize, edit, view, print, save or archive test results by job site, customer, campus or building. You can merge test results into an existing LinkWare database and then sort, search and organize the results by data fields or parameters. And you can count on your data integrity to be secure. Any data uploaded to your computer with LinkWare ensures that the results you store came from the testers’ memory.

If you’re selling your Fluke SM MM Fiber please fill out form on the right hand side of page.

Selling Fluke FT330 – We Buy New Used FT330(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke FT330 Fiber Inspector Video Microscope

FLUKE FT330 Fiber Inspector

Easily inspects installed fiber connectors on patch panels and hardware devices
Easily inspects cables and cable assemblies
Contains high-magnification optics that provide crisp, clear images of microscopic debris and end-face damage
Eliminates the hazards of inspecting live fiber
Ten times faster than traditional scopes
Inspect fiber connections quickly and safely with Fluke Networks’ FT300 FiberInspector.

Dirt, dust and other contaminants are the enemy of high-speed data transmission over optical fiber. With today’s network applications requiring more bandwidth and loss budgets being tighter than ever before, it is critical that all optical connections are clean and free of contaminants to ensure network operation.

The Fluke Networks FT300 FiberInspector puts the solution for your fiber testing business right before your eyes. This portable video microscope works ten times faster than traditional scopes. Simply insert the probe and inspect installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels.

Inspect All Terminations

Inspecting fiber optic terminations in patch panels, hardware devices, test equipment and cable assemblies can be a real challenge without the right tool. You can inspect connectors at the end of a fiber link with a traditional fiber inspection microscope. But how do you get to installed connectors? And how do you access critical fiber connectors on a hardware device?
The FT300 FiberInspector from Fluke Networks is the solution. This portable video microscope gives you superior vision by enabling you to inspect all types of installed fiber terminations in hardware devices and patch panels.

The FT300 FiberInspector saves you time by eliminating the need to access the backside of patch panels or disassemble hardware devices prior to inspection. Instead of removing each individual fiber, you can insert the video probe and inspect the fiber while it’s still in place. This is the only practical way to inspect most hardware devices where disassembly is not a realistic option.

The FT300 FiberInspector includes a handheld LCD display unit and a small, lightweight probe that contains a long-life LED light source and CCD video camera. The probe adapter tip mates with the connector and projects crisp, clear images of microscopic debris and end-face damage on the LCD display. The video display allows you to look at a fiber end-face without looking into the fiber, eliminating all chance of harmful laser light reaching your eye.

Buying, Selling, Trading Fluke FT330

Reduce Contamination

Fiber hardware devices feature connectors at the front or back. These connectors are very difficult to check since they are mounted inside the device’s enclosure. If a contaminated jumper is inserted, the termination inside the device becomes contaminated and contributes to signal loss. The FT300 FiberInspector? never touches the termination, reducing the risk of contamination.
Rugged Design

The FT300 FiberInspector is rugged in design to withstand the drops and other mishaps that occur in today’s network installation environments. The hard carrying case protects your equipment when not in use, so it’s ready to go when you are.

Includes:
Fluke FT330 FiberInspector (Display only)
AC Adapter
Hard Carrying Case

If you’re selling your Fluke FT330 please fill out form on the right hand side of page.

Selling Fluke Microtest – We Buy New Used Microtest(‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Microtest SimpliFiber Fiber Optic Meter

The compact SimpliFiber sources and meter are durable and rugged, featuring textured, impact-resistant covers and an ergonomic shape for a comfortable and secure grip. An integrated cover protects the fiber ports. Long-battery life assures hours of trouble-free operation. The SimpliFiber sources and meter are engineered to work together. The automatic wavelength-sensing feature of the meter identifies the source wavelength and sets itself appropriately. The simplified multi-wavelength tests prevent costly measurement errors.

Buying, Selling, Trading Fluke Microtest

If you’re selling your Fluke Microtest please fill out form on the right hand side of page.