If you’re looking to Sell Fluke Pro SM Networks SimpliFiber MM Power Meter

Simplifiber Pro Power Meter
Fluke Networks’ SimpliFiber® Pro Optical Power Meter incorporates new and innovative features to give technicians a tool that performs and reports test results like no other first-line fiber test tool can.

The optical power meter is calibrated for accuracy at six different wavelengths (850, 1300, 1310, 1490, 1550, 1625). The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It also has an intuitive four-button panel, a large LCD display screen, and a serial port. The meter’s single connector permits simple network connection and straightforward reference power measurement.

Buying, Selling, Trading Fluke Pro SM

1 Conforms to relevant European Union directives; Conforms to relevant Australian standards; Listed by the Canadian Standards Association; Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1)

1 For 850nm, ±0.2 dB for power from 0 to -45 dBm, ±0.25 dB for power < -45 dBm
2 ±0.1dB for power from 0 to -55 dBm, ±0.2 dB for power > 0 dBm and < -55 dBm
3 23°C ±2°C, power level -20dBm, continuous wave, 62.5/125µm at multi mode wavelengths, 9/125 µm at 1310,1490, 1550 and 1625 nm; add 0.1 dB for 1625 nm,
4 For measured power levels 0 dBm or less, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

If you’re selling your Fluke Pro SM please fill out form on the right hand side of page.

If you’re looking to Sell Fluke FT500 Networks FiberInspector & Cleaning Kit

Features:

• 200x magnification probe enables inspection of both multimode and singlemode end-faces inside ports and on patch cords
• Miniature display boasts an exceptionally sharp 1.8″ screen
• Troubleshooting is 10 times faster than with traditional scopes
• Grip trigger activation extends battery life
• Various probe adapter tips allow for inspection through many different connector port types

Use the FT-500 FiberInspector™ Mini to examine installed fiber terminations or ensure terminations are smooth and clean. Avoid the #1 cause of cause of fiber link failure: dirty end-faces.

Dirt, dust and other contaminants are the enemy of high-speed data transmission over optical fiber. Today’s network applications require more bandwidth, making loss budgets tighter than ever. It is critical that all optical connections are clean and free of contaminants to ensure application success.

The Fluke Networks FT500 FiberInspector Mini Video Microscope puts the solution to contaminated end-faces in the palm of your hand. This portable video microscope works ten times faster than traditional scopes. Simply insert the probe and inspect installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels. Using a video microscope also completely ensures that no harmful laser light ever reaches your eyes.

Its miniature size makes the FiberInspector Mini extremely portable and convenient. The device displays exceptionally sharp images on its 1.8″ screen. Extend battery life in the grip trigger mode, when the device only shows images when squeezing the sides of the display. With a range of standard and accessory probe tips, end-faces can be inspected when using many different connector types, including LC connectors.

Buying, Selling, Trading Fluke FT500

Includes:

• Fluke Networks FT500 FiberInspector Mini Video Fiberscope
• FBET Probe Tips:
  • ST
  • SC
  • U25M
• Fluke NetworksFiber Optic Cleaning Cube
• (3) Fluke Networks Fiber Optic Cleaning Cards
• (20) Microcare Connector Cleaning Sticks
• AC Adapter/Charger
• Carrying Case

If you’re selling your Fluke FT500 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke FT354 Networks Fiber Probe

Buying, Selling, Trading Fluke FT354

Includes:

• Fluke Networks FT354 Fiber Probe

If you’re selling your Fluke FT354 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke FTK-300 Networks SimpliFiber MM Test Kit

Fluke Networks FTK-300 Multimode Verification Kit

Verify optical loss and power levels
SimpliFiber Power Meter is calibrated for accuracy at 850 nm, 1300 nm, 1310 nm and 1550 nm. The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It has an intuitive four-button panel, a large LCD display screen and a serial port to upload test results to a PC running LinkWare. SimpliFiber Sources include a dual wavelength SimpliFiber 850/1300 nm Source and separate 1310 nm and 1550 nm SimpliFiber Source. The 1310 Source features a 1310 nm laser.

Ensure smooth, clean fiber connections
Inspect the ends of fiber optic connectors with Fluke Networks’ handheld Fiber Viewer microscopes. Fiber Viewers ensure your termination is smooth, clean and ready for optical transmission. The FT120 200x Fiber Viewer is used to inspect multimode fiber end-faces. The Fiber Viewer contains a special safety filter to minimize risk of eye exposure to harmful infrared rays.

Verify and locate faults
Diagnose and repair simple fiber link problems with Fluke Networks’ VisiFault™ Visual Fault Locator (VFL). The laser-powered VisiFault locates fibers, verifies continuity and polarity, and helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm (with optional adapter) connectors for easy connection.

Reporting made simple
Manage test results, print professional reports or export data into popular spread sheet formats. Both SimpliFiber and CableIQ store test results in memory. SimpiFiber stores up to 100 test results which can be uploaded to your PC using LinkWare Software that comes free with your SimpliFiber. For CableIQ use the included CableIQ Reporter Software.

Multimode Fiber Verification Kit
Choose this option if you are a contractor or network technician who installs and maintains multimode premise networks. Use this kit to verify optical loss and power levels at 850 nm and 1300 nm, inspect fiber endfaces and locate cable faults, connector problems and polarity issues.

Features:

• Verify loss and power levels for multimode fiber links
• Ensure smooth, clean fiber connector endfaces
• Locate cable faults, connector problems and polarity issues
• Count on tools that are field tough and user-friendly
• Convenient carrying case provides protection and easy transport
• Ensure you have the tools you need when you need them

Buying, Selling, Trading Fluke FTK-300

If you’re selling your Fluke FTK-300 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke LS-1310/1550 Networks SM Optical Source

Fluke LS-1310/1550 Laser Source

The Fluke LS-1310/1550 Laser Source provides 1310 nm or 1550 nm laser power for testing singlemode fiber optic cable. The source is designed for use with all Fluke Networks fiber optic power meters and fiber test adapters. The Fluke LS-1310/1550 Laser Source can also be used with other power meters that can measure 1310 nm and 1550 nm wavelengths.

Specifications:

• Emitter type: Laser
• Laser classification: Class 1
• Safety: Complies with ANSI/ISA S82.01-1994, CSA C22.2 No. 1010.1-92, EN61010.1: 1993
• Output wavelengths: 1310 nm +20 nm & 1550 nm +30 nm
• Output connector: Singlemode ST
• Output power: CW: -10 dBm (100 µW) adjustable
• Output level stability: warmup period: +0.2 dB over 1 hour, +0.4 dB over 8 hours

Buying, Selling, Trading Fluke LS-1310/1550

If you’re selling your Fluke LS-1310/1550 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke DSP-FTK FOM FOS Networks MM Fiber Kit 4 DSP

Product Capabilities
Fluke Networks Fiber Test Kit measures power or power loss in optical fiber links used in premise wiring and LAN networks. The DSP-FTK is compatible with the DSP Series cable testers, OneTouch™ Network Assistant and Enterprise LANMeter® test tools.

Verify Fiber Optic Performance
The Fiber Optic Test Kit includes an optical power meter (DSP-FOM), combination 850/1300 nm LED power source (DSP-FOS), patch cables, adapters and hard carrying case.

Simplifies Fiber Testing
The Fiber Optic Meter (DSP-FOM) interfaces with the DSP Series cable testers, OneTouch Network™ Assistant, or Enterprise LANMeter® using a short twisted-pair patch cable which plugs into the 8-pin modular jack of these instruments. Just select the wavelength to be measured with the optical meter’s slide switch (850 nm, 1300 nm, and 1550 nm), and the test tool will input, display, and store the measurement.

Just plug in the modular Fiber Test Adapter (DSP-FTA410S) adapter to the DSP-4000 CableAnalyzer and you’re ready to test fiber for bad connections, bad splices, broken fibers, and loss of power – from one end of the fiber. With talk mode, you can easily communicate with your partner.

Allows a Choice of Test Options
Use the DSP-FOM Fiber Optic Power Meter to measure optical power, in dBm or mW. You can also measure optical power loss (expressed in dB). The power loss measurement (or attenuation) compares the measured light energy at the end of the link (output) to the reference level at the input (the light source). This loss measurement result delivers a true optical loss measurement for the link by subtracting the loss associated with the fiber optic patch cables. The operator can specify the Pass/Fail limit for loss and also the direction (A-B or B-A) of the measurement.

Generates Complete Reports through a PC or Directly to a Printer
You can record and store any combination of copper or fiber optic Autotest reports with the DSP Series cable testers. Each test report can be assigned a unique, user-definable label, and can be downloaded to a PC or printed directly from the cable tester to a serial printer. Test reports contain wavelength, measured loss, loss limit, test direction and reference level. The fiber test results may be saved in the tester memory using a cable name of up to 27 characters long.

Buying, Selling, Trading Fluke DSP-FTK FOM FOS

Easy to Learn and Use
The fiber test accessories complement the Fluke instruments with the same technological leadership and ease of use that has made Fluke an industry standard. The large, easy-to-read menus on the LCD display of the test tools prompt the operator through each step of a fiber link test.
Product Specifications

DSP-FOM Optical Power Meter
Calibrated Wavelengths  850 nm, 1300 nm (used also for 1310 nm), and 1550 nm
Dynamic Range                  +3 to -50 dBm
Measurement Accuracy  ±0.25 dB at -10.0 dBm and 25°C
Display Resolution                  0.01 dB (0.001 µW)
Detector Type                  Germanium
Optical Adapter        ST
Operating Temperature  0° C to +40° C
Storage Temperature  -20° C to +70° C
Dimensions               4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm)
Weight                        5.0 oz (142g)
Battery Type                9V alkaline
Battery Life                90 hours typical

FOS-850/1300 Optical Source
Transmit Wavelengths  850 nm and 1300 nm
Power Output                  -20 dBm
Source Type                  LED
Optical Adapter        ST
Operating Temperature  0° C to +40° C
Storage Temperature  -20° C to +70° C
Dimensions                  4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm)
Weight                                  5.0 oz (142g)
Battery Type                  9V alkaline
Battery Life                             24 hours typical

If you’re selling your Fluke DSP-FTK FOM FOS please fill out form on the right hand side of page.

If you’re looking to Sell Fluke FT500 Networks Video Fiber Inspector

Features:

• 200x magnification probe enables inspection of both multimode and singlemode end-faces inside ports and on patch cords
• Miniature display boasts an exceptionally sharp 1.8″ screen
• Troubleshooting is 10 times faster than with traditional scopes
• Grip trigger activation extends battery life
• Various probe adapter tips allow for inspection through many different connector port types

Use the FT-500 FiberInspector™ Mini to examine installed fiber terminations or ensure terminations are smooth and clean. Avoid the #1 cause of cause of fiber link failure: dirty end-faces.

Dirt, dust and other contaminants are the enemy of high-speed data transmission over optical fiber. Today’s network applications require more bandwidth, making loss budgets tighter than ever. It is critical that all optical connections are clean and free of contaminants to ensure application success.

The Fluke Networks FT500 FiberInspector Mini Video Microscope puts the solution to contaminated end-faces in the palm of your hand. This portable video microscope works ten times faster than traditional scopes. Simply insert the probe and inspect installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels. Using a video microscope also completely ensures that no harmful laser light ever reaches your eyes.

Its miniature size makes the FiberInspector Mini extremely portable and convenient. The device displays exceptionally sharp images on its 1.8″ screen. Extend battery life in the grip trigger mode, when the device only shows images when squeezing the sides of the display. With a range of standard and accessory probe tips, end-faces can be inspected when using many different connector types, including LC connectors.

Buying, Selling, Trading Fluke FT500

If you’re selling your Fluke FT500 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke FOM & FOS Networks MM Fiber Test Kit

The Fiber Optic Power Meter (FOM) measures optical power on fiber optic cables. It indicates any power loss on tested cables using any digital multimeter (DMM) or graphical multimeter (GMM) that has a 10 MW input impedance, standard diameter banana jacks, and mVdc capability. The Fiber Optic Light Source (FOS) is used as a light source with the FOM or other fiber optic meters.

Buying, Selling, Trading Fluke FOM & FOS

If you’re selling your Fluke FOM & FOS please fill out form on the right hand side of page.