If you’re looking to Sell EXFO FOT-930 SM Fiber Tester FOT-932X

FOT-932x MaxTester II

The new FOT-932 MaxTester Multifunction Loss Tester is designed to help network service providers address CAPEX and OPEX issues, enable installers to easily adapt to all network types, and provide CATV operators with a single-unit solution to their backreflection, fiber-length, high-power and bidirectional loss measurement needs. Combined with its video fiber inspection probe, this unit also enables the easy detection of dirty or damaged connectors, providing a clear view of connectors and fiber ends on the FOT-932’s high-resolution display.

With countless configurations available, the FOT-932 MaxTester is the handheld unit of choice for today’s network service providers, fiber-optic network installers/contractors and CATV operators.

FTTx-Mode Operation

This mode lets you configure your FOT-930 MaxTester to suit your FTTx wavelengths and test-unit locations  as well as choose your preferred data presentation options for on-screen display or report generation. Key benefits include:

• Display of test data according to FTTx terminology
• Similar test-data presentation, regardless of the location of master and remote units

Buying, Selling, Trading EXFO FOT-930 SM

If you’re selling your EXFO FOT-930 SM please fill out form on the right hand side of page.

If you’re looking to Sell EXFO LFD-300B FiberFinder Live Fiber Detector

EXFO LFD-300B Live Fiber Detector

A Uniquely Designed Live Fiber Identifier
For major singlemode fibers, insertion loss is a function of the bending angle. Although the angles differ, the behavior remains the same.

The LFD-300B FiberFinder brings a unique approach: the power loss is monitored as the angle is changed. Therefore, the angle is automatically optimized for each fiber type and each singlemode wavelength. This results in clear-cut advantages:

• Maximum loss of 1 dB guaranteed for most singlemode telecom fibers (most jacket types) and any wavelength
• No damage to the fiber: bending is always minimal, and the fiber is released when no power is detected
• Traffic detection and direction identification
• In-line, non-disruptive power estimation
• Safe to be used in long-haul applications and on high-payload fibers contrary to traditional live fiber detectors
• Optimized for 900 µm, 1.6 mm and 3 mm jackets; no need to replace the headpiece

Ambient Light Offset
EXFO’s LFD-300B performs an ambient light offset prior to fiber bending, which makes it less sensitive to ambient light. A push-down cap can also be placed on the head-end to block intense ambient light.

Features:

• Induces minimal loss: = 1 dB
• Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz)
• Three times faster test cycle (<6 s)

Buying, Selling, Trading EXFO LFD-300B
Specifications:

If you’re selling your EXFO LFD-300B please fill out form on the right hand side of page.

If you’re looking to Sell EXFO FPM-300 Fiber Power Meter
Applications

Power measurement
Link-loss characterization
Key Features and Benefits

Highly accurate unit offering 10 calibrated wavelengths and reference values
No offset nulling required, reducing measurement time
Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
Autonomy of over 300 hours
Instrument identification available in six languages
The FPM-300 Power Meter is part of EXFO’s new line of handheld units, which includes the FLS-300 Light Source and the FOT-300 Optical Loss Test Set.

Auto-Wavelength Recognition
The FLS-300 or FOT-300 units can transmit with a wavelength-identification digital encrypted protocol, enabling the FPM-300 Power Meter to automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error.

Distant Referencing
Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart.

No Offset Nulling
Thanks to its unique design, the FPM-300 Power Meter reduces measurement time in typical measurement situations, as the need for an offset nulling is eliminated.

FTTx Ready
EXFO’s FPM-300 allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs.

Buying, Selling, Trading EXFO FPM-300
Specifications:

Power meter port GeX
Power range (dBm) 10 to -50
Range displayed (dBm) Down to -50
Number of calibrated wavelengths 10
Power uncertainty ± 5 % ± 10 nW
Resolution (dB) 0.01
Automatic offset nulling Yes
Warmup time (s) 0
Display units dB/dBm/W
Automatic wavelength recognition Yes
Screen refresh rate (Hz) 3
Tone detection (Hz) 270, 1 k, 2 k
Battery life (hours) (typical) > 300

If you’re selling your EXFO FPM-300 please fill out form on the right hand side of page.

If you’re looking to Sell EXFO FLS-130A Fiber Optic Light Source
The FOS-120A Light Source and FLS-130A Laser Source deliver excellent stability. They are compatible with the FOT-10A and FOT-20A Power Meters, which are suitable for a variety of testing applications including continuity and end-to-end testing.

Versatility
The FOS-120A Light Source and FLS-130A Laser Source feature single- and dual-wavelength sources from single or double ports. The units deliver continuous wave (CW) signals for power/loss measurements and 2-kHz signal generation for fiber identification. Certain FOS-120A models and all FLS-130A models are equipped with EXFO’s Universal Interface.

Unit Powering
Powering options include a 9 V battery and a standard AC adapter. The battery life offers a minimum of seven hours of continuous operation. An auto-off function with a 10-minute timer is included to preserve battery life.

Features:

• Single- or dual-wavelength configuration
• 2-kHz signal generation for fiber identification
• Dual powering: 9 V battery and AC adapter/charger
• Auto-off function
• Rigid carrying case and shockproof holster with strap
• Equipped with EXFO’s Universal Interface, except for certain FOS-120A models

Buying, Selling, Trading EXFO FLS-130A

If you’re selling your EXFO FLS-130A please fill out form on the right hand side of page.

If you’re looking to Sell EXFO FBP-HD1 Fiber Inspection System
The Westover Scientific Video Inspection Probe is a portable, video microscope used to inspect fiber optic terminations. More specifically, the FBP is used to inspect installed connectors that are located inside hardware devices or in the “backside” of patch panels. It eliminates the need to access the backside of patch panels or disassemble hardware devices prior to inspection.

Patch Panels: Many patch panels feature a design wherein one connector is easily inspected (front), but the other is difficult to access (back). Inspecting the connector on the front side of the panel is commonly performed using a simple fiber inspection microscope. However, the backside connectors are not as easily inspected with traditional microscopes, thus requiring time consuming troubleshooting. The FBP system combines with Westover’s line of “Cleaning Sticks” produce a fast and effective means for installing, troubleshooting, or maintaining fiber optic patch panels.

Hardware Devices and Test Equipment: Most hardware devices feature connectors, at the faceplace of a “box”, that lead to the back-plane circuitry. These connectors are very difficult to access since they are built into the device’s enclosure. If a contaminates jumper is inserted, the termination inside the divice can become contaminated and contribure to signal loss. Many test equipment designs feature the same type of “back plane” fiber wherein a critical fiber termination lies just inside a piece of hardware. The FBP “Probe” used in conjuntion with Westover’s line of “Cleaning Sitcks” can be used to ensure that the termination inside is clean.

Mil-Aero Connectors:

If you’re looking to Sell EXFO FOS-121A MM Fiber Optic LED Light Source

The FOS-120A Light Source delivers excellent stability. It is compatible with the FOT-10A and FOT-20A Power Meters, which are suitable for a variety of testing applications including continuity and end-to-end testing.

Versatility
The FOS-120A Light Source features single- and dual-wavelength sources from single or double ports. The units deliver continuous wave (CW) signals for power/loss measurements and 2-kHz signal generation for fiber identification.

Unit Powering
Powering options include a 9 V battery and a standard AC adapter. The battery life offers a minimum of seven hours of continuous operation. An auto-off function with a 10-minute timer is included to preserve battery life.

Features:

• Single- or dual-wavelength configuration
• 2-kHz signal generation for fiber identification
• Dual powering: 9 V battery and AC adapter/charger
• Auto-off function

Buying, Selling, Trading EXFO FOS-121A MM2

Specifications:

If you’re selling your EXFO FOS-121A MM please fill out form on the right hand side of page.

If you’re looking to Sell EXFO PPM-350CPower Meter

• Simultaneous measurement of all PON signals, anywhere on the network
• Innovative workflow management, for boosted test routine efficiency
• Enhanced rugged and weatherproof design
• Protected data format, for guaranteed test result authenticity

The Frontrunner Now Runs Even Faster

When FTTH was first deployed, EXFO was there to test it, namely by pioneering the simultaneous upstream/downstream measurement technique via a pass-through connection. In fact, the EXFO-pioneered PPM-350 series, which quickly established itself as the clear-cut leader in the PON power meter market—over 21 000 units have been sold until now—has played an important part in major FTTH deployments worldwide.

Since then, we have developed our instrument even more to provide you with the best PON power meter yet. The PPM-350C enables quick, on-site testing of all PON signals, anywhere on the network. Its new workflow management capabilities and enhanced ruggedness will increase the efficiency of your daily deployment activities.

Moreover, its visual fault locator port allows for easy fiber identification and macrobend location. This handheld unit also features pass/warning/fail LED indicators with user-defined thresholds.

Reliable Performance, Whether the Elements Agree or Not

Thanks to its enhanced weatherproof design and straightforward user interface, and building on the strength of its predecessor, the PPM-350B, the PPM-350C PON Power Meter establishes a new FTTx testing benchmark. It delivers fast, reliable results, even when used in cold, wet or windy conditions.

Easy-to-Access Data Storage

The unit’s data storage capabilities provide ultimate flexibility. Transfer your data quickly and easily, store your test results for future reference and generate a wide range of FTTH reports. Moreover, the PPM-350C allows you to store up to 1000 test results, which are downloadable through its USB interface.

Simultaneous Measurement of All PON Signals

The PPM-350C acts as a pass-through device, allowing the simultaneous measurement and display of all PON signals—voice, data and video. This patented, built-in technology facilitates service activation testing and troubleshooting.

Quick and Efficient Visual Inspection

Whether for identifying breaks, bends, faulty connectors or splices, as well as other causes of signal loss, the PPM-350C’s optional visual fault locator (VFL) enables quick and easy troubleshooting. This valuable option helps you shorten time-to-restoration cycles and increase the productivity of your field crews.

Automated Pass/Warning/Fail Assessment

In addition to user-defined thresholds, EXFO’s new PON power meter offers pass/warning/fail LED indicators that allow you to clearly and quickly assess your network’s power level. This user-friendly feature facilitates QoS verification.

Rugged and Weatherproof Design

Truly rugged and weatherproof, the PPM-350C is the ideal tool for technicians working outdoors. What’s more, its enhanced design also features a waterproof keyboard, port cover flaps and a protective cap.

Buying, Selling, Trading EXFO PPM-350C

Unique Workflow Management, for Faster Deployments

Ensure the authenticity of each measure

Eliminate the guesswork with EXFO’s comprehensive and easy-to-use data-storage interface designed with PON testing in mind. As such, test results can be stored and flagged per OLT, per ONT and even per location. Then, they are stored in a protected data format, ensuring the authenticity of each measure.

Customize Location Names, Inside and Outside

The computer interface allows easy customization of OLT, ONT and location names. Start testing right away; don’t waste time naming the files. This time-saving feature eliminates the risk of errors. Each file is named correctly so you don’t have to worry about having to rename each file when you are back at the office.

Eliminate Wrong Data Naming and Speed Up Test Routines

The PPM-350C features a Job Editor mode, which allows you to pre-configure upcoming jobs in the unit’s memory. Once on location, you simply have to select the job ID, the ONT number and the location ID for quick data storage—making the need to carry your work schedule in the field a thing of the past. This is the best way to link results with customers/activations, also called jobs. It’s as easy as 1-2-3:

1. Configure jobs at the office prior to a work session
2. Perform field service activation and/or troubleshooting
3. Generate a job report in a few minutes

Plus, if the Job Editor mode is not configured, you can still store your results using generic names, for quick and efficient testing.

Specifications:

If you’re selling your EXFO PPM-350C please fill out form on the right hand side of page.

If you’re looking to Sell EXFO FLS-132A SM Fiber Optic Light Source

The FOS-120A Light Source and FLS-130A Laser Source deliver excellent stability. They are compatible with the FOT-10A and FOT-20A Power Meters, which are suitable for a variety of testing applications including continuity and end-to-end testing.

Versatility
The FOS-120A Light Source and FLS-130A Laser Source feature single- and dual-wavelength sources from single or double ports. The units deliver continuous wave (CW) signals for power/loss measurements and 2-kHz signal generation for fiber identification. Certain FOS-120A models and all FLS-130A models are equipped with EXFO’s Universal Interface.

Unit Powering
Powering options include a 9 V battery and a standard AC adapter. The battery life offers a minimum of seven hours of continuous operation. An auto-off function with a 10-minute timer is included to preserve battery life.

Features:

Single- or dual-wavelength configuration
2-kHz signal generation for fiber identification
Dual powering: 9 V battery and AC adapter/charger
Auto-off function
Rigid carrying case and shockproof holster with strap
Equipped with EXFO’s Universal Interface, except for certain FOS-120A models

Buying, Selling, Trading EXFO FLS-132A SM

Specifications:
Wavelength (nm)
1310 ± 20
Spectral width (nm) = 5
Launch power
9/125 µm
50/125 µm
62.5/125 µm

-7
-7
-7
Power stability (dB)
1 h
8 h

± 0.06
± 0.10
Output ports
1
General
Size (H × W × D) 22.2 cm × 10.3 cm × 5.9 cm (8 3/4 in × 4 1/16 in × 2 1/4 in)
Weight
unit
shipping

0.6 kg (1.4 lb)
1.8 kg (4 lb)
Temperature
operating

-10 °C to 50 °C (14 °F to 122 °F)

If you’re selling your EXFO FLS-132A SM please fill out form on the right hand side of page.

If you’re looking to Sell EXFO FIP-400 Fiber Optical Inspection Probe Kit
EXFO’s FIP-400 Fiber Inspection Probe

KEY FEATURES

• Easy back-panel connector inspection
• Truly rugged and lightweight solution for the ? eld
• Image-capture capability for report documentation
• Ideal for all types of connectors: APC, UPC, MTP and more
• Slim design for easy use in crowded patch panels
• Compatible with EXFO test instruments

ZOOM IN ON CLARITY
It’s a known fact: optical network problems are often caused by dirty and/or damaged connectors. Using a fiber inspection probe to ensure that connectors/adapters are clean and exempt of any defect is where accurate testing starts.

Thanks to EXFO’s FIP-400 Fiber Inspection Probe, checking connectors and other fiber terminations for polish quality and cleanliness has never been easier. Benefit from the best optical resolution in the industry and see scratches and dirt particles as small as 1 µm. Also, use a USB converter to send image captures to a portable platform or a PC.

THE INDUSTRY’S MOST VERSATILE PROBE
With EXFO’s FIP-400, you have the choice—you can either use it with a PC (Requires USB 2.0 Converter), with one of our test sets or with our lightweight, handheld monitor. Choose the way that works best for you.

APPLICATIONS

Patchcord inspection

• Compatible with a wide range of connector types
• Offers great optical performance for patchcord quality assurance
• Use it as a stand-alone unit to perform ? eld applications or with a USB adapter in a manufacturing environment

Patch panel bulkhead inspection

• Get a clear view of both sides of an interconnection
• Inspect hard-to-reach connecto rs without stressing adjacent ?bers, thanks to the FIP-400’s slim design

Single-fiber connector inspection

• Compatible with 1.25 mm and 2.5 mm angled-polished and ultra-polished connectors (APC and UPC)

Multifiber connector inspection

•  Compatible with male and female ribbon connectors such as MTP multi? ber APC and UPC connectors

Buying, Selling, Trading EXFO FIP-400
SPECIFICATIONS

If you’re selling your EXFO FIP-400 please fill out form on the right hand side of page.

If you’re looking to Sell EXFO FOT-20A FOS-120A MM Fiber Loss Test Set

FOT-20A Power Meter

The FOT-20A Power Meter is compact, accurate, rugged and easy-to-use instruments for both power and loss testing. Like all of EXFO’s handheld power meters, the FOT-20A can be calibrated to a custom wavelength.

Features:

• Direct loss measurement in dB
• Five electronically calibrated wavelengths
• Shockproof holster also acts as storage compartment for fiberoptic adapters and replacement battery
• Auto-off function
• Power measurements in dB, dBm and W

Performance
The FOT-20A incorporates EXFO’s linear amplification technology and are traceable to NIST. It offers five calibrated wavelengths, and perform 2 kHz signal detection for fiber identification. Unit configurations are available with germanium or high-power germanium detectors. An electrical offset nulling feature makes the FOT-20A ideal for operation in extreme temperature conditions.

Ruggedness
The FOT-20A Power Meter meets Telcordia’s strict drop-test requirements. A complete range of EXFO fiber-optic adapters is available for connector interface. A single 9 V battery powers these units for over 14 hours.

Applications

• Transmitter power measurements (dBm and W)
• Fiber-link loss testing (dB)
• Component insertion-loss testing (dB)
• Fiber identification with 2 kHz signals
• LAN installation and maintenance applications

Buying, Selling, Trading EXFO FOT-20A FOS-120A MM

Specifications:

EXFO FOS-120A Light Source

The FOS-120A Light Source delivers excellent stability. It is compatible with the FOT-10A and FOT-20A Power Meters, which are suitable for a variety of testing applications including continuity and end-to-end testing.

Versatility
The FOS-120A Light Source features single- and dual-wavelength sources from single or double ports. The units deliver continuous wave (CW) signals for power/loss measurements and 2-kHz signal generation for fiber identification.

Unit Powering
Powering options include a 9 V battery and a standard AC adapter. The battery life offers a minimum of seven hours of continuous operation. An auto-off function with a 10-minute timer is included to preserve battery life.

Features:

• Single- or dual-wavelength configuration
• 2-kHz signal generation for fiber identification
• Dual powering: 9 V battery and AC adapter/charger
• Auto-off function

Specifications:

If you’re selling your EXFO FOT-20A FOS-120A MM please fill out form on the right hand side of page.