Selling Fujikura CT-07BS– We Buy New Used CT-07BS (‘s) Top Dollar Paid!

If you’re looking to Sell Fujikura CT-07BS High Precision Fiber Cleaver

Fujikura CT-07BS High Precision Fiber Optic Cleaver
The Fujikura CT-07BS fiber cleaver is used for cleaving both single-mode and multi-mode fibers. It has two v-grooves, one for 250 micron o.d. coating over 125 micron bare fiber, and the other is for 900 micron o.d. coating over 125 micron bare fiber. This cleaver delivers consistent splices of less than 0.5dB loss.

Buying, Selling, Trading Fujikura CT-07BS

If you’re selling your Fujikura CT-07BS please fill out form on the right hand side of page.Buying, Selling, Trading Fujikura CT-07BS

Selling Oxford FIBJ250 – We Buy New Used FIBJ250 (‘s) Top Dollar Paid!

If you’re looking to Sell Oxford FIBJ250 Fiber Optic Cleaver AFC-20-08

If you’re looking to Sell Fiber Optic Cleaver AFC-20-08

Reduced back-reflection : <-60dB
Accuracy of end angle : no recleaving Fast operation : greater throughput
Angled cleaving of singlemode and PM optical fiber

FEATURES :
Unique angled blade to reduce stresses during cleaving
Easy fiber loading using V-groove
“Stapler” action to reduce operator skill required
Scale for accurate cleave lengths
Multi-position diamond blade for long-life operation
Rugged construction for low maintenance
Benchtop, tripod or handheld

SPECIFICATIONS:
Fiber diameter: 80 to 200um
Cleave angle variation: 0.3 degree std deviation
Blade Life: > 20,000 cleaves (estimated)
Dimensions: 72 mm x 65 mm x 50 mm (3 in x 2.5 in x 2 in)
Weight: 450 g (1.0 lbs)

Buying, Selling, Trading Oxford FIBJ250

INCLUDES
Oxford FIBJ250 Fiber Optic Cleaver
Protective Soft Carry Case
If you’re selling your v please fill out form on the right hand side of page.

Selling ERICSSON EFC 11-4 – We Buy New Used EFC 11-4 (‘s) Top Dollar Paid!

If you’re looking to Sell ERICSSON EFC 11-4 Electronic Fiber Cleaver

Ericsson EFC 11-4 High Precision Cleaver
The most revolutionary aspect of the EFC 11-4 is the ultrasonic cleaving action. A precision diamond blade is attached to a resonant acoustic-stepped horn. The ultrasonic horn resonance is started and maintained for the duration of the cleave by an electronic circuit. It is then automatically terminated to preserve battery life.

The ultrasonically vibrating blade moves slowly towards the tensioned fiber on stiction-less damped bearings. Cleaving takes place without the compressive stresses and blade intrusion into the fiber that is typical of conventional cleavers. This revolutionary new cleaving technique produces superb planar ends of mirror quality with no hackle.

Operation
A stripped and cleaned fiber is placed in the grooves of the cleaver and is held by specially designed low torsion clamps. Constant tension is then applied to the fiber by lowering the tension lever. Cleaving is initiated by pushing the blade release lever downwards. The design allows cleaving to take place as close to the coating as may be required.

The EFC 11-4 fiber cleaver has been designed to provide trouble-free cleaving over many thousands of cleaves. This design does not require constant adjustment to stay “in tune”. In the event of accidental damage to part of the diamond edge, the operator can adjust the blade to bring a new part of the cutting edge into use.

Performance
Ericsson has tested five different EFC 11-4 cleavers, performing more than 500 cleaves in all (100 splices per cleaver).

The test showed that most of the cleaves had a mean angle of 0-0.5 degrees, indicating superior cleaving results with the EFC 11-4. This ability to cleave optical fiber with end angles consistently less than 1° is a necessity for a good splicing result.

Features:

  • Electronically tune ultrasonic blade
  • For multimode and singlemode fiber
  • End angle consistently < 1°
  • For laboratory and field use
  • Easy to handle

Buying, Selling, Trading ERICSSON EFC 11-4

If you’re selling your ERICSSON EFC 11-4 please fill out form on the right hand side of page.

Selling Alcoa Fujikura AFL – We Buy New Used AFL (‘s) Top Dollar Paid!

If you’re looking to Sell Alcoa Fujikura AFL Precision Infrared IR Thermometer

PowerCleave™ To complement the line of world class splicing systems, AFL Telecommunications’ PowerCleave™ high-strength cleaver combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave’s tensile cleaving method includes a tension clamping system and a diamond-tipped ultrasonic blade, allowing for consistently flat ends even at cleave lengths as short as 3mm. Specially designed for the FSM-40F/PM fiber holders, this advanced fiber management system allows for more reliability and greater splicing consistency with less dependence on operator technique.

FEATURES :
* Tensile cleaving with ultrasonic blade.
* Consistent, low-angle cleaves of short cleave-length fibers.
* Fiber holder system increases splicing results by reducing skill dependency.
* Fiber holder system reduces fiber handling.
* Clean, reliable quality.

SPECIFICATIONS :
* tention setting: 200
* fiber type: Corning 28-smf
* fiber diameter: 125uM
* mean fringe count: 1.3
* mean end angle: 0.20 degrees

Buying, Selling, Trading Alcoa Fujikura AFL

INCLUDES :
* Alcoa Fujikura FK11-FJ AFL PowerCleave Fiber Optic Cleaver
* Fiber Cleaver Diamond Blade Adjustment Screw(2mm) Allen Wrench
* Fiber Cleave Length Adjustment Screw (STANLEY 67-415 0.4X2.5X50) Micro Slotdriver
* Fiber Cleaver User’s Guide-Hard Copy
If you’re selling your Alcoa Fujikura AFL please fill out form on the right hand side of page.

Selling Fujikura CT-04B – We Buy New Used CT-04B (‘s) Top Dollar Paid!

If you’re looking to Sell Fujikura CT-04B Fiber Optic Cleaver CT-04

Fujikura CT-04B high precision fiber optic cleaver

The Fujikura CT-04B high precision fiber optic cleaver is exceptionally easy to use and offers consistently excellent results, providing in excess of 24,000 cleaves per circular blade. The CT-04B is a rugged, self-contained unit designed to offer consistently reliable and accurate cleaves which cannot be affected by operator skill.

Features:
The Fujikura CT-04B fiber cleaver is used for cleaving both single-mode and multi-mode fibers. It has two v-grooves, one for 250 micronod. coating over 125 micron bare fiber, and the other is for 900 micronod. coating over 125 micron bare fiber. This cleaver delivers consistent splices of less than 0.5dB loss.

Buying, Selling, Trading Fujikura CT-04B

If you’re selling your Fujikura CT-04B please fill out form on the right hand side of page.

Selling ERICSSON EFC 11 – We Buy New Used EFC 11 (‘s) Top Dollar Paid!

If you’re looking to Sell ERICSSON EFC 11 Electronic Fiber Cleaver

Ericsson EFC 11 Fiber Cleaver

Features:

• Electronically tuned ultrasonic blade
• For multi-mode and single-mode fiber
• End angle consistently < 1°
• For laboratory and field use
• Easy to handle

The most revolutionary aspect of the EFC 11 is the ultrasonic cleaving action. A precision diamond blade is attached to a resonant acoustic-stepped horn. The ultrasonic horn resonance is started and maintained for the duration of the cleave by an electronic circuit. It is then automatically terminated to preserve battery life.

The ultrasonically vibrating blade moves slowly towards the tensioned fiber on stiction-less damped bearings. Cleaving takes place without the compressive stresses and blade intrusion into the fiber that is typical of conventional cleavers. This revolutionary new cleaving technique produces superb planar ends of mirror quality with no hackle.

Operation

A stripped and cleaned fiber is placed in the grooves of the cleaver and is held by specially designed lowtorsion clamps. Constant tension is then applied to the fiber by lowering the tension lever. Cleaving is initiated by pushing the blade release lever downwards. The design allows cleaving to take place as close to the coating as may be required.

The EFC 11 fiber cleaver has been designed to provide trouble-free cleaving over many thousands of cleaves. This design does not require constant adjustment to stay “in tune”. In the event of accidental damage to part of the diamond edge, the operator can adjust the blade to bring a new part of the cutting edge into use.

Buying, Selling, Trading ERICSSON EFC 11

Performance

Technical Data
Battery: 9V alkaline (MN 1604) recommended
Battery life: 10,000 cleaves
Estimated blade life: >20,000 cleaves
Fiber diameter: 80-200 µm
Weight: 1.2 kg (2,6 lb)
Size: 150 x 150 x 68 mm (6″ x 6″ x 2 2/3″)
If you’re selling your ERICSSON EFC 11 please fill out form on the right hand side of page.

Selling PK Technology FK11 – We Buy New Used FK11 (‘s) Top Dollar Paid!

If you’re looking to Sell PK Technology FK11 Electronic Fiber Optic Cleaver

PK Technology FKII Fiber Cleaver

 

  • Electronically-tuned ultrasonic blade
  • Unique low torsion fiber clamping
  • Laboratory precise, field rugged
  • Axial tension adjusts for fiber diameter
  • Battery powered: 9V
  • Battery life: 1000 Cleaves
  • Cladding diameter: 80-200 microns

 

Buying, Selling, Trading PK Technology FK11

FKII – for fibers with nominal coating diameters to 250 µm, clamps fiber 16 mm from cleave point

Features and Benefits:

  •   Provides tension prior to cleaving for a clean cleave, ensuring no damage to glass
  •   Long life with durable blade provides extended use
  •   Versatile – cleaves a wide range of fiber types and sizes
  •   Clean – no contamination during cleaving
  •   Easy-to-use – fast terminations reduce installation or pigtailing costs

If you’re selling your PK Technology FK11 please fill out form on the right hand side of page.