If you’re looking to Sell Noyes OLS 1-2 MM Fiber Optic LED Light Source

Noyes OLS 1 LED Source
The OLS1 LED light source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on fiber optic links when used with an optical power meter. The LED output is stabilized to ensure accurate test results per current TIA/ EIA requirements.

The OLS1 is easy to operate with only a [Wavelength/ Power] switch, which selects optical wavelengths or disables unit ( position). [Active Output], [Battery], and [External Power] indicators identify the currently enabled output port, battery charge status, and external power presence. Weighing only 0.65 lb, the OLS1 is compact and convenient for field use. The OLS1 operates over 60 hours from a typical 9V alkaline battery. An AC adapter is optional for extended use.

The OLS1 light source is fully N.I.S.T. traceable.

Features:
Rugged, handheld, lightweight
850 and 1300 nm LED (multimode) light sources
Certify 50 µm or 62.5µ multimode fiber links for any 850 or 1300 nm application, including Gigabit Ethernet (GBE) per TIA/EIA standards
Long battery life
N.I.S.T. traceable

Buying, Selling, Trading Noyes OLS 1-2

Specifications:
Output Ports 2
Output Wavelength 850 + 35/-40 nm 1300 +50/-10 nm
Spectral Width (typ) (FWHM) 40 nm 120 nm
Output Power >-20 dBm >-20 dBm
Fiber Size 62.5 µm
Output Connector ST
Emitter Type LED, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Stability
±0.1 dB over 8 hours (after 5-minute warm-up)
GENERAL SPECIFICATIONS
Power Typical 60 hours with 9V battery, optional AC adapter
Operating Temperature -10°C to 50°C
Storage Temperature
-30°C to 60°C
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)

If you’re selling your Noyes OLS 1-2 please fill out form on the right hand side of page.