If you’re looking to Sell OPM 5-2C SM MM Fiber Optic Power Meter

OPM 5-2C
The OPM 5 is used to perform diagnostic and evaluation measurements associated with fiber optic transmission systems and cable plant. Applications for the OPM 5 will be found within the telecommunication, cable television, data network, and industrial control industries.

The OPM 5 measures absolute power (in dBm or µW ) and loss (dB). Absolute power expressed in dBm is the amount of optical power received by the detector as compared to 1mW (0dBm=1mW). Measuring dBm is useful for verifying the output power of a transmitter and determining system losses.

Loss is the difference in optical power from a known input (the reference level) and the output power at the opposite end of the fiber under test. The OPM 5 can display dB loss directly after a reference level has been set. Loss measurements are used to qualify cable plant links and fiber optic jumpers.

Microwatts is also a way to measure absolute power. Some manufacturers specify their transmission equipment in watts instead of dBm. The OPM 5 offers the ability to measure watts for convenience when verifying output power of transmitters. For accurate results, always be sure to set the OPM 5 to measure the same wavelength as the output of the optical light source.

Buying, Selling, Trading OPM 5-2C

Specifications:
Calibration Wavelength (nm)
850, 1300, 1310,
1550nm
Tone Detection Range (dBm)
+6 to – 35
Tone Detection Frequency (Hz)
270 ± 13.5
1000 ± 50
2000 ± 300
Detector Type
Germanium (Ge)
Display Range (dBm)
+6 to -60 dBm
Accuracy (@ 25°C & -10.0dBm)
±0.25 dB
Resolution
0.01 dB (.1 dB selectable)
Battery Life
>30 hrs. typical operation with 9V Alkaline
Adapter Caps
Order Separately (ST, SC, FC and others available)
Size (H x W x H)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.56 lb (0.26 kg)
Operating Temp
0° to 50° C
Storage Temp
30° to 60° C
Relative Humidity
0 to 95% (non-condensing)

If you’re selling your OPM 5-2C please fill out form on the right hand side of page.