If you’re looking to Sell JDSU OLP-5 MM Fiber Optical Power Meter

• Pocket class: Rugged, compact and lightweight
• Easy-to-use, straight forward operation
• Reliable basic functionality for most economical testing
• Three year calibration period
• Dedicated for all single mode and multi-mode applications like LAN, Telecom, CATV, and DWDM testing
• Universal push pull interface (2.5 or 1.25 mm)
• Twintest and Auto-?
• Compact design, versatile use
• Standard AA batteries or NiMH/NiCd cells

Buying, Selling, Trading JDSU OLP-5

If you’re selling your JDSU OLP-5 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU OMK-5 Acterna Fiber Loss Test Set

• Dedicated solutions for all applications in verification, installation, maintenance, and surveillance of fiber optic networks
• Easy report generation with FiberAssistant software and high performance test kits
• Simple reliable operation
• Rugged, compact, and lightweight
• Three year recalibration period

The JDSU OMK-5 is a handy, pocket-sized instruments optimized for absolute power and loss measurements. This Kit also includes one power meter and one light source as standard. This combination is ideal for power and loss measurements. Each kit is packaged in its own robust field carrying case complete with all necessary adapters, cables. accessories.

It is simple, compact and ideal for most measurements. Three-button operation and a bright, clear display make the pocket-sized OMK-5 very easy to use. The reference level for the attenuation measurement is made to IEC-874 (method 6) and can be saved with a single keystroke.

The Possibility of measurement errors is eliminated because the power meter automatically detects the wavelength being transmitted by the light source. As a result, dual wavelength measurements can be made quickly and easily, using the saved reference levels.

The OMK-5 also features an automatic identification of individual fibers. It can be used to detect the modulation frequency of light coupled into the fiber to be measured for identification purposes.

To speed up this process, high performance OMKs feature an audible signal, identifying the fiber as one of four standard frequency. The signal sounds as soon as the fiber to brought near the input point.

The OMK5 is designed for rugged field instrumentation and an optimized power supply. All pocket-sized OMKs come supplied with a robust case with enough space for accessories and test cables. For the individual configuration of a customer specific OMK, JDSU offers separate bags and cases. The very useful OVF-1 (visual fault locator) fits into all of the OMK series cases, and allows for the fast and easy identification of fibers and detection of fiber faults.

Buying, Selling, Trading JDSU OMK-5

If you’re selling your JDSU OMK-5 please fill out form on the right hand side of page.

If you’re looking to Sell WWG OLP-18C Acterna SM MM Fiber Power Meter

The OLP-18C is a compact, high performance optical power meter for installation, maintenance and repair in fiber optic networks. They can be used on their own for simple system power measurements, or with a light source for insertion lossmeasurements.

The full functionality of the high performance OLP range is realized when used with an Acterna Optical Light Source (OLS).

Together with a variable optical attenuator the OLPs are the right instruments for the commissioning of optical transmission systems, for example: DWDM systems.

Highlights

• Easy report generation with FiberASSISTANT software
• Data storage and RS-232 interface
• Rugged, impact resistant, splash-proof
• Three year recalibration period
• High precision, easily exchangeable adapter including UPP

High performance measurement
High performance OLPs feature a wide dynamic range making them suitable for use in many different applications. The OLP-18C is designed for those with high power levels such as CATV systems, optical amplifiers and DWDM systems.

Precision calibration to traceable national standards ensures high accuracymeasurement in user selectable units. Two unique Universal Push Pull (UPP) adapters provide reliable, reproducible connection to all common 1.25 and 2.5 mm connectors, ensuring the user always has the correct connection in the field.

Absolute power level can be stored with a single keystroke, making it easy to take relative loss test measurements.

AutoWavelength Detection and TwinTest
Used with an Acterna Optical Light Source (OLS), high performance OLPs feature two powerful functions, designed to avoid the possibility of measurement errors.

The AutoWavelength Detection function detects the actualwavelength being used and switches automatically to the appropriate wavelength range. TwinTest performs two wavelength loss measurements automatically.

Automatic identification of individual fibers
High performance OLPs can be used to detect the modulation frequency of the fiber to be measured, for identification purposes. To speed this process, an audible signal identifying the fiber as one of four standard frequencies sounds as soon as the fiber is brought near the input.

Data storage
High performance OLPs can store up to 1000 sets of testmeasurements. Data can be downloaded to a printer for hard copy records, or to a PC for long-term storage and further analysis using Acterna’s FiberASSISTANT PC software.

Rugged field instrumentation
OLP-18C features low power consumption for long battery life. It can be operated with AC, dry or rechargeable AA batteries which can be changed in the field very easily. The unit is supplied in a robust housing, with splashproof foil keypad and protectors for the optical connectors, to ensure reliable operation even in harsh field conditions.

Buying, Selling, Trading WWG OLP-18C

If you’re selling your WWG OLP-18C please fill out form on the right hand side of page.

If you’re looking to Sell WWG OLA-15B Acterna SM Fiber Attenuator

• Wide range of applications in systems installation and maintenance, as well as production
• Large, continuously variable attenuation range
• Attenuation settings highly accurate and reproducible
• High return loss
• Universal interchangeable adapter system
• Rugged shock and water-resistant casing
• AC, dry- or rechargeable battery operation

Wide range of applications in systems installation and maintenance, as well as production
The OLA-15 Optical Attenuator is a handy-sized, rugged instrument for variably attenuating optical signals in single-mode applications at 1310 and 1550 nm. Example applications include the simulation of line loss for BER tests on fiber optics systems, the determination of system margin / receiver sensitivity or the calibration of optical power meters. A complete test set comprising signal source, attenuator and power meter contained in a shock-resistant case is also available.

Large, continuously variable attenuation range
The large rotary control on the front panel is used to set attenuation quickly and simply within a wide range between 3 and 60 dB. The optical path is not interrupted when the attenuation is altered. As the OLA-15 is bidirectional, the instrument is very easy to use.

Attenuation settings highly accurate and reproducible
Reliable measurements demand accuracy and reproducibility of the attenuation setting. Each instrument is individually calibrated, guaranteeing that every OLA-15 meets this requirement. Careful design of the optical components ensures interference-free attenuation settings over the entire temperature range. The attenuation setting is indicated on a large liquid-crystal display.

High return loss
The OLA-15 is also suitable for measurements on systems sensitive to back-reflection, e.g. those operating at high bit rates. The return loss (reflection attenuation) of more than 40 dB means that the OLA-15 can be looped into the signal path without problems and without affecting the transmission characteristics.

Universal interchangeable adapter system
The universal system of interchangeable adapters allows matching to all commonly-used fiber optics connector systems, such as FC, SC and DIN. It also ensures easy access to the instrument’s internal connectors for the purposes of cleaning and inspection. Special dust caps protect the optical connectors from dirt and damage.

Rugged shock and water-resistant casing
The instrument is protected against shocks and wear and tear by a well-designed, non-slip, robust casing, giving the OLA-15 the mechanical ruggedness required for field use under often difficult ambient conditions. The foil keypad gives protection against dripping water. A fold-out instrument stand is located on the back panel.

AC line or long-life battery operation
The Optical Attenuator is designed for use with dry batteries or with NiCd cells. Typical operating time from dry batteries is 45 hours; a set of NiCd cells will run for typically 15 hours, more than a day of uninterrupted operation. When a separate AC adapter is used, the instrument can be AC powered and NiCd batteries fitted in the instrument can also be recharged.

Buying, Selling, Trading WWG OLA-15B

If you’re selling your WWG OLA-15B please fill out form on the right hand side of page.

If you’re looking to Sell WWG OLS-15 SM Fiber Laser Light Source

• Optimized for field measurements on single-mode systems
• TWINtest: Simultaneous measurement of attenuation at 1310 and 1550 nm
• Auto-l mode for automatic wavelength detection on the power meter
• Fiber identification using modulated signals
• Universal interchangeable adapter system
• Rugged, shockproof and splashproof housing
• AC, dry- or rechargeable battery operation

Optimized for field measurements on single-mode systems
During installation testing and maintenance work on all sorts of single-mode fiber optical systems (e.g. long-distance telecom systems, passive optical networks for FITL applications), a highly stable output power level is required along with a wide dynamic range (attenuation measurements). To obtain the desired degree of measurement accuracy, a light source is needed on the transmit end which can launch sufficient optical power into the fiber. With their -7 dBm output power level, the OLS-15 Optical Laser Source is ideal for these applications. In conjunction with the OLP-15 Optical Power Meter, they provide features which greatly simplify installation, maintenance and troubleshooting/ repair of these systems. OLS-15 is a dual-wavelength source for 1310 and 1550 nm with a common output for both wavelengths.

TWINtest: Simultaneous measurement of attenuation at 1310 and 1550 nm
With its common output for both wavelengths, the OLS-15 dualwavelength source can transmit signals at 1310 and 1550 nm in alternation (TWINtest mode). The OLP-15 meter can then detect and evaluate these signals at the correct wavelength. This makes it very easy to characterize a device under test (DUT) at both wavelengths in a single step.

Auto-? mode for automatic wavelength detection on the power meter
All of the OLS sources include the Auto-l mode; an identifier is transmitted to indicate the current wavelength. On the receiving end, the OLP-15 reads the wavelength identifier and automatically switches to the proper wavelength. Erroneous measurements can be avoided using this mode; fiber identification is another possibility.

Fiber identification using modulated signals
If the sources are used with a meter such as the OLP-10 (in place of the OLP-15) or another industry-standard fiber identifier, the output signal can be modulated at 270 Hz, 1 kHz or 2 kHz. The modulation frequency is then detected and displayed on the receiving end.

Universal interchangeable adapter system
The universal adapter system handles the common fiber optical connector systems, such as FC, SC and DIN. The internal connector is also easily accessible for inspection and cleaning. A dustcap is included to protect the optical connector.

Rugged, shockproof and splashproof housing
The laser sources have a form-fitted, shockproof and splashproof housing which provides the mechanical ruggedness needed to handle tough conditions in the field. The membrane keypad is waterproof. A fold-out stand is provided on the back of the sources.

Battery or a.c. power
The laser sources can be powered with dry batteries or NiCd cells. They can be operated for typ. 28 h on dry batteries or typ. 9 h on NiCd cells (i.e. more than one workday). When a separate AC adapter is used, the instrument can be AC powered and NiCd batteries fitted in the instrument can also be recharged.

Buying, Selling, Trading WWG OLS-15

If you’re selling your WWG OLS-15 please fill out form on the right hand side of page.

If you’re looking to Sell Wavetek MTS-5100 Acterna SM Loss Test 50660

Key Features:

• Wide range of OTDR and OLTS modules covering every application with two fast field interchangeable slots for modules
• The ONLY platform highly visible in bright sunlight, this NEW high visibility screen option means the MTS-5100 can be used in any lighting condition
• From LAN (1.5 m event dead zone) to very long haul applications (44 dB dynamic range)
• High performance testing (up to 128,000 acquisition points with 0.1 s real-time sweep)
• Maximum portability (3.5 kg) and up to 16 hours battery operation (Telcordia GR196)
• A complete range of PC software to enhance your OTDR reporting capabilities reducing cable acceptance reporting by up to 70%

Advanced modular tester for high precision FTTx testing
The unique JDSU MTS-5100 is a fiber tester with a range of plug-in modules providing a comprehensive, integrated solution for OTDR and power meters with talk set option testing in one field-rugged instrument. Powerful, easy to use and highly cost-effective, MTS-5100 is designed to push the boundaries of field test productivity for network installers, operators and maintenance teams.

A wide range of field-interchangeable modules are available for the MTS-5100 platform, including OTDRs for multimode (MM), very short haul/FTTx (VSR), short range (SRe), medium haul (DR), long haul (HD), very long haul (VHD), and 1625 nm, visual fault locator, and a range of light sources and power meters with talk set option.

JDSU’s optical time domain reflectometer (OTDR) and loss test (LTS) plug-in modules are compact, yet powerful additions to the MTS-5100 family of testers. The MTS-5100 offers the industry’s fastest, highest performance solutions of any OTDR field instrument on the market. Both the OTDR and LTS modules deliver high accuracy, cost effective, reliable testing for the installation and maintenance of FTTx networks.

The MTS-5100 OTDR is the fastest,most reliable and accurate OTDR on the market.
Together, the module’s automation and rapid testing features offer impressive time savings for companies involved in commissioning and locating faults in FTTx networks.

Maximizing field productivity
The most important prerequisites for testing in the field are ease-of-use and speed of acquisition. The OTDR module ensures maximum test productivity by providing one-button, automated operation for all of its critical test routines and a very high data acquisition speed of 40 dB in seconds.

Delivering the industry’s highest performance OTDR
The MTS-5100 OTDR module is the fastest and most accurate OTDR to-date. It offers a dynamic range of up to 44 dB at 1550 nm and boasts a 0.1 second sweep time. As part of the MTS-5100, the OTDR module has a test capability of more than 200 km and can measure up to 128,000 separate data points with 4 cm sampling resolution. The product’s short deadzone enables the user to differentiate events down to 1 meter.

Optimized functions for in-depth analysis/operation
The OTDR’s bidirectional analysis capability enables true splice loss measurement with both end traces.Its multiple trace management feature greatly assists the process of proactively managing fiber problems and helps compare different current and stored measurements for in-depth analysis. A powerful macro function enables users to perform a series of tests without ongoing user intervention.

Suitable for every skill level
Whatever the user’s skill level, the OTDR module and MTS-5100 instrument combination can rise to the challenge. Direct access keys ensure that users can access all the instrument’s sophisticated features via a highly intuitive interface and by a comprehensive set up and results screen. The OTDR module delivers complete trace analysis, with a direct link between trace and table.

Enhanced reporting power
Powerful instruments require powerful reporting tools. The OTDR and loss test set come with the most complete analysis and reporting software. The package supports direct Ethernet transfer to a PC running JDSU’s OFS-100 Optical Fiber Trace Software or OFS-200 Optical Fiber Cable Software. This enables users to perform automatic multiple trace analysis and print out cable test results in batches, for fast generation of dedicated acceptance reports.

Buying, Selling, Trading Wavetek MTS-5100

Includes:

• Wavetek MTS 5100 Mainframe With Options:
  • Color
  • Floppy Drive
• JDSU 50660 LTS Singlemode Module
  • Source:
    • 1310nm
    • 1550nm
  • Power Meter
    • 850nm
    • 1310nm
    • 1550nm
  • Talkset
• (2) SM SC-SC Fiber Cables
• JDSU OFS-110 Optical Fiber Trace Viewer Software
• Battery Pack
• AC Adapter/Charger
• Power Cord
• RS232 PC Interface Cable
• User Manual On CD-ROM
• Hard Carrying Case

If you’re selling your Wavetek MTS-5100 please fill out form on the right hand side of page.

If you’re looking to Sell Acterna JDSU OFI2000 SM Fiber Loss Test Set

Key Features

• FOX functionality allows for automatic continuity check, bi-directional IL, ORL, and length measurements with a single key press
• FTTx ready by integrating dedicated wavelengths (1310/ 1490/1550 nm) for PON testing as well as an optimized test sequence for increased field productivity
• Compact and rugged design makes it an ideal field tool
• Large front panel provides easy access for the connection/disconnection of the fiber
• Large, high-visibility color display allows for use in any lighting conditions, making it suitable for both outside plant and central office use
• Test results are provided in a single table, providing a very comprehensive data management system
• Pass/fail indicators allow for rapid fault detection and identification

Fiber network deployment, service provisioning, and troubleshooting

In today’s telecommunications market, test solutions must be cost effective, increase productivity, and reduce the complexity of field testing. JDSU’s OFI-2000 Multifunction Loss Test Set offers a highly versatile handheld test instrument, which has been specifically developed in response to these industry demands.

Configurable at the time of order, the OFI-2000 is capable of fully characterizing the suitability of the optical fiber for transport, metro, or access networks, including FTTx and Passive Optical Network (PON) systems.

By combining a large high-visibility color display, intuitive one-button Fiber Optics eXpert (FOX) functionality, and simple pass/fail indicators, the OFI-2000 enhances productivity and reduces the burden of training technicians. Cables with high fiber counts can be easily characterized using the OFI-2000’s unique color-coding and large memory storage capabilities. In addition, professional proof-of-performance reports can be quickly generated using JDSU’s FiberBudget and FiberCable software solutions.

Improve productivity and efficiency in the field

The OFI-2000 includes several features that improve productivity and reduce test times on cables with high fiber counts. Using the test instrument’s FOX functionality, technicians are guided through the test setup process. In addition, one single key press automatically tests, displays, and records measurements on both the near-end and far-end units.

• Ensure accurate and consistent testing with the OFI-2000’s durable shock- and weather-resistant design
• Extend testing periods using batteries in the field (up to 14 hours)
• Dramatically reduce test times by evaluating fiber continuity, insertion loss (IL), optical return loss (ORL), and length measurements and displaying all results on both OFI-2000 units within 15 seconds per fiber
• Minimize the amount of time required for fiber connection and disconnection using the OFI-2000’s easy front panel access
• Store complete test results in both OFI-2000 units for an on-site reporting capability in master-master systems
• The OFI-2000 automatically stores results at the end of each test and replicates the results between the near-end and far-end units to ensure the integrity of the test data
• Minimize handling errors using the OFI-2000’s pass/fail indicators

Portable, rugged, weather resistant and battery operated, the OFI-2000 is ideal for field testing during the installation and deployment of both fiber and PON networks.

Test the fiber

Using the OFI-2000’s easy-to-use graphical user interface (GUI), the test instrument is simple to set up for referencing and obtaining ORL measurements. The technician is easily guided through the necessary steps. Each unit integrates a precise standalone power meter to enhance referencing and improve optical return loss budget measurement accuracy.

• Provides an automated bi-directional loss test set for fiber insertion loss, return loss, length, and continuity checking as well as an optional VFL and optical talk set
• Tests at 1310/1550/1625 nm wavelengths for telecommunications applications
• Tests at 1310/1490/1550 nm wavelengths for FTTx/PON applications
• Provides accurate and reliable ORL measurements even on very short spans of fiber, FTTx for example

Buying, Selling, Trading Acterna JDSU OFI2000

Bi-directional FTTx testing using one technician

• In compliance with ITU-T G.983.3, the OFI-2000 provides a three wavelength version at 1310 nm, 1490 nm, and 1550 nm, expanding its test capabilities to FTTx/PON
• The master-master operation of the OFI-2000 enables technicians to leave one unit at the central office (CO) in standby mode and perform the testing from the ONT using the other unit. Alternatively, multiple OFI test instruments (OFI-2000s or OFI modules for the MTS/T-BERD platforms) can be used.
• Document both ends of the link with one piece of test equipment

Communicate along the fiber

Near-end and far-end technicians can communicate with each other using the built-in short messaging system (SMS). For more flexible dialog during testing using a dedicated communications fiber, the OFI-2000 is available with a 45 dB optical talk set option, providing a dedicated port and headset/microphone for both units.

• 45 dB optical talk set offers a constant communication capability with a dedicated port and headset/microphone
• Compatible with all optical talk sets in JDSU’s product portfolio, including the MTS/T-BERD platforms and the OTS-55

Comprehensive list of cable results

Using JDSU’s unique cable manager solution, the amount of time and costs associated with analyzing your results can be significantly reduced. Results can be provided by job, cable, or fiber according to the pass/fail thresholds that have been preset by the technician.

• Large memory storage capability and pass/fail indicators improve productivity (up to 1000 fibers)
• The user-definable color-coding management system follows TIA/EIA wiring standards and automatically decodes the fiber number to help the technician identify the different fibers
• The results display allows for the rapid identification of missing records and/or “fail” values

Generate the test report

Transfer the data and generate comprehensive reports using JDSU’s FiberBudget software. This software is complimentary and can be downloaded from jdsu.com.

• Generate proof-of-performance reports with a high degree of customization capabilities
• Dedicated tables are provided for each test result (length, loss, ORL)
• Out-of-range value summaries are provided with analysis of macro-bends
• Compare results between the different wavelengths to identify bends and constraints

Enhanced testing solution

The OFI-2000 not only functions as a standalone test solution, but it can also be combined with JDSU’s MTS/T-BERD platforms for the complete characterization of the fiber network using additional test functions, such as OTDR, CD, and PMD. The OFI-2000 is fully compatible with the OFI module of the optical test platform allowing for fiber continuity checks and bi-directional length, loss, and return loss measurements as well as enabling communication through the optical talk set or using the SMS.

Simplify fiber testing!

A wide range of accessories are available that will provide technicians with everything they need to take advantage of the OFI-2000’s complete testing capabilities.

Bi-directional test set specifications

These specifications apply to the OFI-2000 Series.
To ensure optimal use (bi-directional measurement and communication), two OFI-2000 units are required.

If you’re selling your Acterna JDSU OFI2000 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU OLS-5 Multimode Fiber Optical LED Source

JDSU OLS-5
Pocket-sized dual wavelength light sources, 850 – 1300 nm

• Pocket class: Rugged, compact and lightweight
• Easy-to-use, straight forward operation
• Reliable basic functionality for most economical testing
• Three year calibration period
• Dedicated for multimode at 850 and 1300 nm
• Standard AA batteries or NiMH/NiCd cells
• FTTx ready

The JDSU OLS-5 pocket-sized light sources are the result of JDSU’s many years of experience in optical measurement technology. They are designed for dual wavelength measurement alongside JDSU’s pocket-sized or Smart optical power meters.

The rugged OLS-5 is really pocket-sized and fit into a handy belt bag so they are always ready to use. The simple three-button operation together with an easy-to-read display makes them extremely easy-to-use.

For multimode applications the OLS-5 is the ideal choice. Via one single port 850 and 1300 nm LEDs are connected to the test cable. Together with an JDSU optical power meter (OLP) automatic wavelength detection and TwinTest guarantee fast and error-free results at a high test speed.

Buying, Selling, Trading JDSU OLS-5

If you’re selling your JDSU OLS-5 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU OLA-55M SMART Optical Fiber Attenuator

For singlemode system testing installation, maintenance, and production.

The OLA-55M SMART Motorized Optical Level Attenuator is a variable optical attenuator with a level controller mode in a single, rugged, handheld instrument.

Highlights

• Absolute and relative attenuation setting.
• USB port for remote operation.
• Two operating modes: optical attenuator, and automatic level controller.
• Automatic stabilization of the output power with the automatic level controller mode.
• Reduces the need for couplers and additional instruments in test setups.
• Direct setting of the output power with the automatic level controller mode.

Applications

• Simulation of line loss for BER testing and amplifier testing.
• Power level control for calibration test setups.

Key Features

• The SMARTStar graphical user interface for fast, easy, and straightforward operation.
• The SMARTEnergy power supply management system.
• A robust, shock-proof, and splash-proof design for field operation.
• One-handed operation in the field.
• Quick start operation, requiring no warm-up time and reducing testing time.

JDSU SmartClass optical handhelds go beyond the basics
With more than 100,000 optical handhelds already in use, JDSU continues the success story with the SmartClass optical handhelds. The SmartClass helps your network move to the next level of performance. SmartClass optical handhelds encompass a new, intelligent, and next level product line for testing all optical signals and systems, including broadband, PONs, and Gigabit Ethernet.

All SmartClass optical handhelds provide:

• An extended number of calibration wavelengths for the highest performance range in the industry.
• An intuitive graphical user interface for fast, easy, and straightforward operation.
• An intelligent power supply management system.
• A belt bag for safe and hands-free operation and transport.
• Traceable measurements to international standards for confidence in accuracy.
• A robust, shock-proof, and splash-proof design for field operation.
• Quick start operation, requiring no warm-up time and reducing testing time.

The SmartClass OLA-55M (optical level attenuator) is the latest design of the SmartClass product range. In this unit more functions have been added to the well known SmartClass OLA-55, which is a future-proof instrument for system testing, installation, maintenance, and production of singlemode fibers. Due to minimized differential group delay (DGD), the SmartClass OLA-55M is also suitable for 40 Gbps systems.

Automatic level controller mode
Most applications require a defined power level rather than a certain level of attenuation. A standard attenuator only allows the setting of an attenuation value. Against it, the level controller mode of the SmartClass OLA-55M allows direct setting of a precise and defined optical power level. It integrates the function of an attenuator and a power meter and therefore avoids extra steps to adjust the power level with a separate power meter. Being in this mode the attenuator is automatically counterbalancing the changes of varying input power level and provides a stable output level.

Buying, Selling, Trading JDSU OLA-55M

(1) Including connectors (to IEC874-1, method 6), depending on quality of the connectors applied to the OLA
(2) Excluding remating
(3) Input power level needs to be at least 3 dB higher than seelcted output power level
(4) At 23 °C ± 3 °C, calibrated wavelengths, at 1625 nm ± 0.3 dB
(5) Input power variations in frequency range <0.5 Hz

Includes:

• JDSU OLA-55 SMART Optical Level Attenuator
  • 1300nm
  • 1310nm
  • 1550nm
  • 1625nm
• Fiber Cables:
  • SM SC-SC
  • MM SC-SC
• User Manual On CD-ROM
• Carrying Case

If you’re selling your JDSU OLA-55M please fill out form on the right hand side of page.

If you’re looking to Sell JDSU HP3-80-P4 Fiber InspectionSystem

The industry’s only handheld solution for inspecting and testing fiber networks with one device.

The new JDSU HP3-80 display system combines fiber inspection and High Power optical power measurement into a single seamless handheld device. The result is a significant increase in workflow efficiency and a decrease in total inspection and testing time. Also available is the HP3-80-P4 that features an integrated patch cord microscope for dedicated patch cord inspection.

The HP3-80-P4 system, derived from the popular HD3 series, provides high-quality image resolution in a compact, portable design. The integrated power meter offers quick, easy, and convenient field measurement of High Powered optical power and attenuation. Easy push-button operation makes the device simple and straightforward, while the inspect-test process establishes optimal workflow practices.

Highlights

Promotes best practices in fiber handling by combining inspection and testing into one device
Integrated functions & feature improve workflow by eliminating need to switch from one device to another
Significantly reduce total inspection and test time for superior workflow efficiency
Reduces the number of tools and accessories you carry and manage
Inspect the bulkhead with the probe and the patch cord with the integrated PCM (with HP3-80-P4)

Applications

Inspects fiber end faces and accurately tests and measures optical power in one device
Quickly and easily inspects both the bulkhead (with probe) and patch cord (with PCM) sides of fiber interconnects
Measures optical power and attenuation (with JDSU optical light source)
Dedicated for all single-mode and multimode applications
Use with JDSU light source to detect modulation frequency and identify individual fibers
Promotes proper fiber handling workflow and practice

Key Features

Inspect both sides of fiber interconnect, and accurately test and measure optical power with one device
Integrated functions and features eliminate switching between multiple devices
Input for FBP series probe microscope and a dedicated patch cord microscope (HP3-80-P4) lets users quickly and easily inspect both sides of fiber interconnects
1.8 inch TFT LCD to view clear, crisp, detailed images of fiber end faces with optimal resolution
Integrated power meter for all single-mode and multimode applications, such as LAN, TELECOM, CATV, and DWDM testing
Modulation frequency detection lets users identify individual fibers
Three-year calibration period
TWINtest and Auto-? (with JDSU optical light source)

Benefits of the Integrated PCM

Lets users quickly and easily inspect both sides of the fiber interconnect
Reduces inspection time by more than 50 percent
Inspects bulkhead with probe microscope and patch cord with PCM
Eliminates changing inspection tips on the probe to inspect patch cord side
Prevents misplaced and mishandled inspection tips
Prevents misrouting by inspecting one port/channel at a time
Protects male (patch cord) ends from contamination by parking it in the patch cord module
A complete selection of FMAE adapters for every application and connector

Integrated Patch Cord Microscope (PCM)

The HP3-80-P4 features an integrated patch cord microscope, adding further value with improved workflow efficiency. Enabling the user to quickly and easily inspect both the female (bulkhead) and male (patch cord) sides of a fiber interconnect and measure optical power levels makes the HP3-80-P4 the ultimate system for fiber technicians.

JDSU offers a complete selection of FMAE adapters that lets users inspect every application and connector.

Buying, Selling, Trading JDSU HP3-80-P4

Comparison (Display Types)
JDSU Fiber Display Types (with Probe Microscope)
HD3 HD3-P HP3-80 HP3-80-P4
Inspect patch cords (w/Probe microscope) ? ? ? ?
Inspect bulkheads (w/Probe microscope) ? ? ? ?
Inspect both sides quickly and easily (w/Probe+PCM) ? ?
Test/measure optical power and attenuation ? ?

Integrated High-Powered Power Meter

Basic and Reliable
The power meter is used for simple optical power testing, or with a light source for insertion loss measurements at various wavelengths (850, 980, 1300, 1310, 1490, 1550 and 1610 nm).

Accurate Measurement and Simple Operation
Three-button operation and a bright, clear display make the power meter very easy to use. When combined with a JDSU light source, the possibility of measurement errors is eliminated because the power meter automatically detects the wavelength being transmitted. As a result, dual wavelength measurements at 850 and 1300 nm or 1310 and 1550 nm can be made quickly and easily using the saved reference levels.

Automatic Identification of Individual Fibers
The power meter can be used with a JDSU light source to detect the modulation frequency of the light coupled into the fiber, for identification purposes.

Universal Push-Pull Interface
Interchangeable UPP adapters let you connect and test any fiber connector.

Power Meter Specifications
Display Range –65 to +10 dBm
Max. Permitted Input Level +23 dBm
Intrinsic Uncertainty ±0.20 dB (±5%)
Linearity
(-50 to +5 dBm) ±0.06 dB
Wavelength Range 780 to 1650 nm
Wavelength & Modulation1300, 1310, 1490, 1550 nm 850 nm 270 Hz, 330 Hz, 1 kHz, 2 kHz–35 to +23 dBm–30 to +23 dBm
Run Time ~180 hours (continuous on)
Auto-shutoff Time 20 minutes
Connectable Fiber Types 9/125 to 100/140 ìm
Optical Interface UPP 2.5 mm adapter
(DIN, ST, FC, SC, E2000)UPP 1.25 mm adapter
(LC, MU) – sold separately
Display LCD, 4-digit
Result Display In dBm, dB
Resolution 0.01 dB

HP3-80-P4 Specifications
Dimensions 162 x 114 x 42 mm (6.4 x 4.5 x 1.7 in)
Weight 333 g (11.7 oz) with six AA alkaline batteries
Video Display 45.7 mm (1.8 in) TFT LCD
Connector 4-pin HiroseTM input for FBP probes
Power Source Six AA batteries or AC power adapter (100–240 VAC/9V DC/500mA)
Power Mode ON (continuous on)OFF
Run Time ~3 hours (continuous on)
Auto-shutoff Time 20 minutes
Horizontal Field-of-View (FOV) 550 µm @ 200X; 350 µm @ 400X

If you’re selling your JDSU HP3-80-P4 please fill out form on the right hand side of page.