If you’re looking to Sell Noyes MLP 4-2 Multimode Fiber Loss Test Set

Features:

Loss Measurements at 850 and 1300 nm
Multimode and Singlemode Testing
Set Reference for Each Wavelength
Small Size, Field Portable, Battery Operated
Auto or Manual Power Off
N.I.S.T. Traceable

The MLP 4-2 Test Kit offers accurate fi ber optic testing at an affordable price. Combining the OPM 4-2C Optical Power Meter and the OLS 1-2 Optical Light Source in a rugged carry case, the MLP 4-2 is a complete Test Kit for fi ber optic LAN’s, and WAN’s.
Used during installations or maintenance, the MLP 4-2 performs insertion loss measurements on multimode fi ber at 850 and 1300nm, as well as singlemode fi ber at 1300nm. The auto zero feature stores reference values at each wavelength for direct loss readings in dB.

Buying, Selling, Trading Noyes MLP 4-2

The OLS1-Dual LED light source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on fiber optic links when used with an optical power meter. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements.
The OLS1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned.
Specifications

Optical Power Meter OPM 4-2C
Calibration Wavelength 850, 1300, 1310, 1490, 1550nm
Detector Type Germanium (Ge)
Measurement Range +6 to -60dBm
Accuracy ±0.25dB
Resolution 0.01dB
Power >60 hrs. typical with 9V Alkaline
Adapter Cap ST
Size (H x W x D) 5.5 x 3.2 x 1.5in (14 x 8 x 3.8cm)

Optical Light Source OLS 1-2
Wavelength 850, 1300nm
Emitter Type LED
Stability ±0.1 dB/8 hrs.
Output Power
Multimode (62.5/125µm) -20dBm @ 850nm, -20dBm @ 1300nm
Single-mode ( 9/125µm) -40dBm @ 1300nm
Power 80 hrs. typical operation with 9V alkaline,
AC adapter optional
Optical Connectors ST
Size (H x W x D) 4.6 x 2.6 x 1.2in (11.7 x 6.6 x 3.2cm)

If you’re selling your please fill out form on the right hand side of page.

If you’re looking to Sell Noyes OPM 1-1 MM Power Meter

OPM 1 Optical Power Meter
This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls – ON/OFF and wavelength – the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.

Buying, Selling, Trading Noyes OPM 1-1

Features:

– Displays optical power (dBm)
– Our simplest to use optical power meter
– N.I.S.T. traceable

If you’re selling your Noyes OPM 1-1 please fill out form on the right hand side of page.

If you’re looking to Sell Noyes MLP 1 MM Fiber Loss Test Set

Noyes MLP 1

The MLP 1 test kits are inexpensive solutions for testing multimode and single-mode systems. By joining the OPM 1 optical power meter and the OLS 1 optical light source, the MLP 1 is a great kit for beginners or network owners. Two versions of the MLP1 test kit are available for testing Premises networks, LAN, and Gigabit Ethernet.

Features:

• Multimode Testing
• Loss measurements at 850 and 1300nm
• Includes 50 and 62.5 µm mandrels
• Field portable, battery operated
• Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300nm application, including Gigabit Ethernet (GBE)
• N.I.S.T. traceable

Buying, Selling, Trading Noyes MLP 1

OPM 1

This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls – ON/OFF and wavelength – the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.

If you’re selling your Noyes MLP 1 please fill out form on the right hand side of page.

If you’re looking to Sell Noyes MLP 1 OLS1-2C MM Fiber Loss Test Set

OPM 4 Optical Power Meter
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

Features:

• Rugged, handheld, lightweight
• Multimode or single-mode applications
• Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
• Wave ID – automatic wavelength identification and switching
• Passive Optical Networks (PON) testing
• Dual Wavelength testing
• 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
• Large LCD with Backlight
• Power measurements in dBm or µW; insertion loss in dB
• Reference power level storage
• AA alkaline, optional rechargeable NiMH battery pack
• Battery Gauge
• N.I.S.T traceable

Buying, Selling, Trading Noyes MLP 1

If you’re selling your Noyes MLP 1 please fill out form on the right hand side of page.

If you’re looking to Sell Noyes OPM4 SM MM Fiber Optic Loss Test Set

OLS1 Dual Light Source

OLS2 Dual Laser Source

The OLS2-Dual from AFL Telecommunications is a handheld, rugged laser source designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern. Associated with each operating condition, the designated LED indicator will illuminate to identify the currently enabled operating mode and emitted wavelength(s) along with battery charge status and external power presence.The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned. The OLS2-Dual offers long battery life from common AA alkaline batteries with external AC adapter available as an option.
The OLS2-Dual is fully N.I.S.T. traceable.

Features:

• Handheld, rugged, lightweight
• Dual wavelengths from a single port
• Dual or single Wave ID, CW, To
• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
• Adjustable output
• Low battery LED indicator
• Long battery life with 2 x AA alkaline, optional AC adapter
• Cost-effective, easy to use
• N.I.S.T. Traceable
Applications:

• Certify SM links per TIA/EIA standards
• Fiber identification prior to splicing

Buying, Selling, Trading Noyes OPM4

Noyes OPM 4 – Adds Wave ID & Set Reference

The Noyes OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.

The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.

The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

The OPM 4-4C is calibrated at 850, 980, 1310, 1550, nm and designed for the higher power level requirements of long range, amplified optical spans used in CATV and DWDM networks.

If you’re selling your Noyes OPM4 please fill out form on the right hand side of page.

If you’re looking to Sell OPM 5-2C SM MM Fiber Optic Power Meter

OPM 5-2C
The OPM 5 is used to perform diagnostic and evaluation measurements associated with fiber optic transmission systems and cable plant. Applications for the OPM 5 will be found within the telecommunication, cable television, data network, and industrial control industries.

The OPM 5 measures absolute power (in dBm or µW ) and loss (dB). Absolute power expressed in dBm is the amount of optical power received by the detector as compared to 1mW (0dBm=1mW). Measuring dBm is useful for verifying the output power of a transmitter and determining system losses.

Loss is the difference in optical power from a known input (the reference level) and the output power at the opposite end of the fiber under test. The OPM 5 can display dB loss directly after a reference level has been set. Loss measurements are used to qualify cable plant links and fiber optic jumpers.

Microwatts is also a way to measure absolute power. Some manufacturers specify their transmission equipment in watts instead of dBm. The OPM 5 offers the ability to measure watts for convenience when verifying output power of transmitters. For accurate results, always be sure to set the OPM 5 to measure the same wavelength as the output of the optical light source.

Buying, Selling, Trading OPM 5-2C

Specifications:
Calibration Wavelength (nm)
850, 1300, 1310,
1550nm
Tone Detection Range (dBm)
+6 to – 35
Tone Detection Frequency (Hz)
270 ± 13.5
1000 ± 50
2000 ± 300
Detector Type
Germanium (Ge)
Display Range (dBm)
+6 to -60 dBm
Accuracy (@ 25°C & -10.0dBm)
±0.25 dB
Resolution
0.01 dB (.1 dB selectable)
Battery Life
>30 hrs. typical operation with 9V Alkaline
Adapter Caps
Order Separately (ST, SC, FC and others available)
Size (H x W x H)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.56 lb (0.26 kg)
Operating Temp
0° to 50° C
Storage Temp
30° to 60° C
Relative Humidity
0 to 95% (non-condensing)

If you’re selling your OPM 5-2C please fill out form on the right hand side of page.

If you’re looking to Sell Noyes MLP 5-2B MM Light Pack MM Fiber Test Kit

Noyes Multimode Test Set (MLP 5-2B)
The Noyes MLP5-2 fiber optic loss test kit combines the OPM5-2C optical power meter and OLS1-Dual LED light source and is ideally suited for testing multimode fiber optic networks.

The OLS1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned.

The OPM5-2C offers Wave ID, automatic wavelength identification and switching, when used with the OLS1-Dual light source. The OPM5-2C stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or ¼W] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory.

Using the supplied Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, analysis, and printing.

In addition to being powered by two AA alkaline, the OPM5-2C or OLS1-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack.

The OPM5-2C optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.

The OPM5-2C and OLS1-Dual are fully N.I.S.T. traceable.

Features:

• Rugged, handheld, lightweight
• Designed for field use
• Certify multimode fiber links per TIA/EIA standards
• Wave ID – automatic wavelength identification and switching
• Dual Wave ID, single Wave ID, and CW
• Large LCD with Backlight
• Power measurements in dBm or µW; insertion loss in dB
• Reference power level storage
• Up to 500 test records storage per wavelength
• USB port for download of stored records
• AA alkaline, optional rechargeable NiMH battery pack or AC adapter
• Low battery indicator
• Free 50 µm and 62.5 µm mandrels
• Cost-effective, easy to use
• N.I.S.T. traceable

Buying, Selling, Trading Noyes MLP 5-2B
OPM 5-2C
The OPM 5 is used to perform diagnostic and evaluation measurements associated with fiber optic transmission systems and cable plant. Applications for the OPM 5 will be found within the telecommunication, cable television, data network, and industrial control industries.

The OPM 5 measures absolute power (in dBm or µW ) and loss (dB). Absolute power expressed in dBm is the amount of optical power received by the detector as compared to 1mW (0dBm=1mW). Measuring dBm is useful for verifying the output power of a transmitter and determining system losses.

Loss is the difference in optical power from a known input (the reference level) and the output power at the opposite end of the fiber under test. The OPM 5 can display dB loss directly after a reference level has been set. Loss measurements are used to qualify cable plant links and fiber optic jumpers.

Microwatts is also a way to measure absolute power. Some manufacturers specify their transmission equipment in watts instead of dBm. The OPM 5 offers the ability to measure watts for convenience when verifying output power of transmitters. For accurate results, always be sure to set the OPM 5 to measure the same wavelength as the output of the optical light source.

If you’re selling your Noyes MLP 5-2B please fill out form on the right hand side of page.